Perfect for Spring - Splash Suit
Prewash fabric if you wish to do so.
Step 1: Print out the pattern, and cut out material, overview your pattern to ensure you have cut out all the correct pieces. If you are lining your splash suit cut out required pieces out of both.
Step 2: Lay the zipper down on the outer fabric, and sew using the zipper foot. Place the lining (wool) on top and sew once again sandwiching the zipper between the outer and lining. Complete for both left and right.
Step 3: Sewing back panel on both the outer & the liner. Once assembling all the pieces, we will be flipping them right side right and placing the liner into the shell.
Step 4: Sew the top/shoulder pieces together, followed by sewing on the sleeves.
Step 5: Flip right side right
Prepare cuffs; I used the merino interlock for the cuffs.
Step 7: Sew/Serge on cuffs.
Step 8: Sew the middle piece onto both the outer and inner of the hood. Sew outer & inner together, flip, and sandwich between the two layers, pin and sew. Alternatively, you could serge the hood to the outer & lining.